Filter
Top Products
Rev. 1.00
- 22 -
SRP-270
5-7 Insert the end of the roll paper into the groove on the Roller-Pulley, warp the paper
around it two or three times and load the Roller-Pulley onto the groove of the Case.
5-8 Push the auto-cutter cover as shown below and close the printer cover.
※ NOTE
Push upper face of the auto cutter cover for completely locking of it.
5-9 When the ERROR light is on and PAPER OUT light blinks, please press the
FEED button. After that, the printer is ready for printing.