Filter
Top Products
Rev. 1.00
- 26 -
SRP-270
7. Self Test
The self-test checks whether the printer has any problems. If the printer does not function
properly, contact your dealer.
7-1 Make sure paper roll has been installed properly.
7-2 Turn on the power while holding down the FEED button. The self-test begins.
7-3 The self-test prints the current printer status, which provides the control ROM version
and the DIP switch setting.
7-4 After printing the current printer status, self-test printing will print the following,
and pause (The PAPER LED light blinks).
Self-test printing.
Please press the FEED button
7-5 Press the FEED button to continue printing. The printer prints a pattern using the built-
in character set.
7-6 The self-test automatically ends after printing the following.
** Character Test Completed **
7-7 The printer is ready to receive data when it completes the self-test.