Filter
Top Products
8
1-3. Printer Part Names
(1)
(4) (3)
(2)
(5)
(10)
(11)
Rear View
Rear View
STP-103S STP-103P
(6) (7) (8)
(9)
Control Panel
POWER ERROR FEED ON LINE
(1) Cover top
(2) Case top
(3) Case bottom
(4) Control panel
(5) Roller
(6) Power switch
(7) Interface connector (male)
(8) DC Jack
(9) Interface connector (female)
(10) Roll paper
(11) Detector switch
9
1-4. Operating Control Panel
The control panel has two buttons and two lights.
POWER ERROR FEED ON LINE
Buttons
The control panel buttons perform paper feeding and on line function.
ON LINE
Press the ON LINE button to ready to receive data from the computer.
FEED
Press the FEED button once to advance paper one line. You can also press the
FEED button continuously to feed paper continuously.
Feed button is valid when ON LINE button is off.
Indicator Lights
The control panel lights provide information on printer conditions.
POWER (green)
The POWER light is on when the printer power is on.
ERROR (red)
1) The error LED blinks fast when paper is out.
2) The error LED blinks when the Near End Sensor triggered.