Samsung 150MP, 170MP Computer Monitor User Manual


 
English 5
Setting up Your LCD Monitor
Connecting Your LCD Monitor
Figure 3. Cable connections
1
Connect the power cord to the DC adapter and connect the adapter jack to the DC12V
power port on the back of your monitor.
2
Connect the signal cable to the video port on your computer.
3
Connect the RCA cable or S-VHS cable to your DVD, VCR or camcoder.
(RCA cable and S-VHS cable not included)
4
Connect the audio sources(computer, DVD, VCR or Camcoder) to proper Audio input
ports(Ain(L), Ain(R) or Ain(stereo)).
5
Connect your external audio system to the Line-out port.
6
Connect your headphone to the Headphone-out port.
7
Connect antenna or CATV cable to “Antenna” port.
8
Turn on both your computer and the monitor.
9
If necessary, install the video driver for the monitor. (See “Installing the video driver”
on page 6)
10
After your monitor has been fully installed successfully, run Auto-Adjustment.
(See page12)
1
DVD or VCR
2
3
4
5
6
7
IN OUT
4_E150MP170MPbody.fm Page 5 Wednesday, September 19, 2001 2:54 PM