Filter
Top Products
55
3 Using MDC
3
Using MDC
MDC (Multiple Display Control) is an application that allows you to easily control multiple display
devices simultaneously using a PC.
3.1 Configuring Settings for Multi Control
MENU Multi Control ENTER
Assigns an individual ID to the SET.
3.1.1 ID Setup
Assigns distinctive IDs to the SET.
3.1.2 ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the
transmitter setting becomes activated.
3.1.3 MDC Connection
Selects a port to receive the MDC inputs from.
RS232C MDC
Communicates with the MDC via a RS232C MDC cable.
RJ45 MDC
Communicates with the MDC via an RJ45 MDC cable.
3.1.4 Network Setting
IP Setting: Manual, Auto
IP Address: Manually enter the IP Address if IP Setting is set to Manual.
Subnet Mask: Manually enter the Subnet Mask if IP Setting is set to Manual.
Gateway: Manually enter the Gateway if IP Setting is set to Manual.
O
m
0XOWL&RQWURO
0XOWL&RQWURO
0RYH
(QWHU
5HWXUQ
,'6HWXS
,',QSXW
0'&&RQQHFWLRQ 56&0'&
1HWZRUN6HWWLQJ