Filter
Top Products
Figure 3-5 CRMAFS OPTION Settings
Now, you can proceed to build the kernel and the kernel modules. Before starting build process
your kernel cross compile path ‘CROSS_COMPILE = ’ must be set in
$(KERNEL_TOP_DIR)/Makefile. To build the kernel, type the following commands in sequence.
shell> cd $(KERNEL_TOP_DIR)
shell> make clean
shell> make dep
shell> make uImage
Then, the kernel image file named ‘uImage’ will be created if no error occurs. As mentioned
earlier, the RFS sources are compiled and linked as a loadable kernel module. To make the
kernel modules, do the following.
shell> make modules
shell> make modules_install
11 Linux RFS v1.3.0 Porting Guide