Filter
Top Products
4
POWER SUPPLY
Batteries
1. Open the battery compartment lid.
2. Install two “AAA” batteries. Observe proper polarity.
Battery indicator ( )
The line of rectangles is the battery gauge. Black rectangles show the battery
condition.
: Full, good condition
or (“LOW BATT” appears.): Weak or exhausted batteries, must
be replaced.
CAUTION:
Remove the batteries if the unit will not be used for a month or longer.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DIS-
POSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE
LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY
SOLID WASTE AUTHORITY.
AC adaptor
Connect the AC adaptor (SANYO Model No. 3CV-120US, not supplied) to
the EXT DC 3V jack. (The batteries are automatically disconnected.)
• The center pin of the EXT DC 3V jack is positive (+).
12
Fig. 3