Sanyo PDG-DSU30 Projector User Manual


 
10
Remote Control Battery Installation
Press rmly and slide
the battery cover off.
1
Put the cover
back.
3
Install new battery into the
compartment.
2
Remove the old Lithium
coin cell and install new
one (CR2025). Ensure
that the side with a “+”
is facing up.
To ensure safe operation, please observe the following precautions :
Use CR2025 type battery.
Avoid contact with water or liquid.
Do not expose the remote control to moisture or heat.
Do not drop the remote control.
If the battery has leaked in the remote control, carefully wipe the case clean and
install new battery.
Risk of an explosion if battery is replaced by an incorrect type.
Dispose of used battery according to the instructions.
Remote Control Operating Range
Point the remote control
toward the projector (In-
frared Remote Receiver)
when pressing any button.
Maximum operating range
for the remote control is
about 23.0’ (7m) and 30° in
front of the projector.
23.0’ (7m)
Approx.15°
M
n
O
2
-
L
i
C
E
L
L
3
V
O
L
T
S
J
A
P
A
N
H
CR2025
3
V
O
L
T
S
CR2025
M
3
V
O
L
T
S
CR2025