Filter
Top Products
4
FOR EU USERS
The symbol mark and recycling systems described
below apply to EU countries and do not apply to
countries in other areas of the world.
Your SANYO product is designed and manufactured
with high quality materials and components which can
be recycled and/or reused.
The symbol mark means that electrical and electronic
equipment, batteries and accumulators, at their end-
of-life, should be disposed of separately from your
household waste.
Note:
If a chemical symbol is printed beneath the symbol
mark, this chemical symbol means that the battery
or accumulator contains a heavy metal at a certain
concentration. This will be indicated as follows: Hg:
mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection
systems for used electrical and electronic equipment,
batteries and accumulators.
Please, dispose of them correctly
at your local community waste
collection/recycling centre.
Please, help us to conserve the
environment we live in!
TÜRK KULLANICILAR İÇİN
Bu ürün, EEE yönetmeliğine uygundur.
(ELEKTRİKLİ VE ELEKTRONİK EŞYALARDA BAZI ZARARLI
MADDELERİN KULLANIMININ SINIRLANDIRILMASINA
DAİR YÖNETMELİK)
NOTE FOR CUSTOMERS IN THE US
Hg LAMPS INSIDE THIS PRODUCT CONTAIN MERCURY
AND MUST BE RECYCLED OR DISPOSED OF ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS.
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken.
– Do not put any flammable object or spray can near
the projector, hot air is exhausted from the ventilation
holes.
– Keep the exhaust vent at least 3' (1 m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on
the cabinet will not only get damaged but also cause
fire hazard by heat.
– Do not cover vents with papers or other materials.
– Make sure that there are no objects under the
projector. An object under the projector may prevent
the projector from taking cooling air through bottom
vent.
– When carrying the projector, retract the adjustable
feet to prevent damage to the lens and cabinet and
use a suitable carrying case.
– Do not put the projector in a case before it is cooled
enough.
– Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any
other transport service, consult your dealer.
– When this projector is not in use for an extended
period, put it into a suitable case to protect the
projector.
– For ceiling mounting, you need the ceiling mount
kit designed for this projector. When not mounted
properly, the projector may fall, causing hazards or
injury. For details, consult your dealer. The warranty
on this projector does not cover any damage caused
by use of any non-recommended ceiling mount kit
or installation of the ceiling mount kit in an improper
location.
Authorized Representative and Address:
SANYO Sales & Marketing Europe GmbH
Stahlgruberring 4, D-81829 Munich, Germany
Manufacturer and Address:
SANYO Electric Co., Ltd.
5-5, Keihan-hondori 2-chome, Moriguchi City, Osaka
570-8677, Japan
臺灣使用者
廢電池請回收