Sanyo PLC-XU25/A Projector User Manual


 
21
Basic Operation
Press the NO SHOW button on the remote control to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button. When a projected image is captured and set
as “User” in the Logo item in the Setting Menu (p38), the screen
changes each time you press the NO SHOW button as follows.
The message disappears after 4 seconds.
Press the P-TIMER button on the remote control. The timer display
“00 : 00” appears on the screen and the timer starts to count time (00
: 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. And then, press the
P-TIMER button again to cancel the P-Timer function.
1
2
Press the MENU button and the On-Screen Menu will appear.
Press the Point Left/Right button to move the red frame pointer
to the Sound Menu icon.
Volume
Press the VOLUME (+/–) button on the top control or on the remote
control to adjust volume. The volume dialog box appears on the
screen for a few seconds.
(+) button to turn up the volume and (–) button to turn down the
volume.
Mute
Press the MUTE button on the remote control to cut off sound. To
restore sound to its previous level, press the MUTE button again or
press the VOLUME (+/–) button.
Press the Point Right button to turn up the volume, and press the
Point Left button to turn down the volume.
Press the Point Left/Right button to cut off sound. Dialog box display
is changed to “On” and sound is cut off. To restore sound to its
previous level, press the Point Left/Right button again.
Press the Point Down button to move the red frame pointer to
the item that you want to select, and then press the SELECT
button.
indicates approximate
level of volume.
closes the Sound Menu.
Direct Operation
Volume
Mute
indicates approximate
level of volume.
Press the MUTE button to set
the Mute function On or Off.
The display disappears after 4 seconds.
Sound Menu
Sound Menu icon
No Show Function
P-Timer Function
Sound Adjustment
Menu Operation
black out the captured image normal
• • • • •