Filter
Top Products
Setting
50
This function is used to reset the lamp replacement
counter. When replacing the projection lamp, reset the
lamp replacement counter by using this function. See
page 55 for operation.
Lamp counter
Factory default
This function returns all setting values except for the
user logo, PIN code lock, Logo PIN code lock, and the
lamp counter to the factory default settings.
This function provides the following alternatives in the
cooling fans' operation after turning off the projector.
(p.19)
L1. . . . . . normal operation
L2. . . . . . slower and lower-sound than the normal
operation (L1), but it takes longer to cool
the projector down.
Fan
Exit the Setting Menu.
Quit
Select Factory default
and this box appears.
Select [Yes], and the
next box appears.
Factory default
Select [Yes] to
activate it.