Sanyo PLC-SP20N Projector User Manual


 
– 8 –
SETTING-UP THE PROJECTOR
100"
60"
40"
150"
200"
250"
77"
46"
30"
115"
154"
192"
H1
H2
231"
300"
Maximum Zoom
Minimum Zoom
DISTANCE
AIR INTAKE VENT
(BOTTOM SIDE)
EXHAUST VENT
(REAR SIDE)
Ideally the projector should be placed in a
room with limited light. Picture quality will
be directly affected by lighting conditions.
VENTILATION
This projector is equipped with a cooling fan to protect it from
overheating. Pay attention to the following to ensure the ventilation
and avoid a possible risk of fire and malfunction.
¡Do not cover the vents with papers or other materials.
¡Keep the rear grill at least 3.3 (1m) away from any
object.
¡Make sure that there are no objects under the projector.
An object under the projector may prevent the projector
from taking the cooling air through the bottom vent.
POSITIONING:
ROOM LIGHT
¡This projector is basically designed to project on a flat projection surface.
¡This projector can be focused from 4.6 (1.4 m) ~ 35.4 (10.8 m).
¡Use the illustration below as an example when positioning the projector to the screen.
Screen Size
Max. Zoom
Min. Zoom
Distance
40"
30"
4.6 (1.4m)
60"
46"
7.2 (2.2m)
100"
77"
11.8 (3.6m)
150"
115"
17.7 (5.4m)
200"
154"
23.6 (7.2m)
250"
192"
29.5 (9.0m)
300"
231"
35.4 (10.8m)
Screen Size
(W x H) mm
Height (H1)
Height (H2)
30"
24 x 18
17.1 inch
0.9 inch
60"
48 x 36
34.2 inch
1.8 inch
100"
80 x 60
57 inch
3 inch
150"
120 x 90
85.5 inch
4.5 inch
200"
160 x 120
114 inch
6 inch
250"
200 x 150
142.5 inch
7.5 inch
300"
240 x 180
171 inch
9 inch