Sanyo PLC-XT10 Projector User Manual


 
30
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.
When Digital zoom + is selected, ON-SCREEN MENU disappears
and the message D. Zoom + is displayed. Press SELECT button to
expand image size. And press POINT UP/DOWN/LEFT/RIGHT
button(s) to pan the image. Panning function can work only when
the image is larger than screen size.
A projected image can be also expanded by pressing D.ZOOM
button on Remote Control Unit.
1
To cancel Digital Zoom +/ mode, press any button except D.ZOOM
/, SELECT, POINT and LASER buttons.
Move the red frame to the function and
press SELECT button.
Press POINT DOWN button and move a red frame pointer to the
function that you want to select and then press SELECT button.
2
Wide
Digital zoom +
Provides image to fit screen size.
Normal
True
SCREEN MENU
SCREEN Menu icon
When Digital zoom is selected, ON-SCREEN MENU disappears
and the message D. Zoom –” is displayed. Press SELECT button to
compress image size.
A projected image can be also compressed by pressing D.ZOOM
button on Remote Control Unit.
Digital Zoom
Provides image in its original size. When the original image size is
larger than screen size (1024 x 768), this projector enters Digital
zoom + mode automatically.
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
COMPUTER INPUT
NOTE
Picture screen adjustment cannot be operated
when 1035i (HDTV), 1080i50 (HDTV) or
1080i60 (HDTV) is selected on PC SYSTEM
Menu (P23).
Wide cannot be selected when 720p (HDTV) is
selected on PC SYSTEM Menu (P23).
True and Digital zoom +/ cannot be operated
when RGB is selected on PC SYSTEM Menu
(P23).
This projector cannot display any resolution higher
than 1280 X 1024. If your computers screen
resolution is higher than 1280 X 1024, reset the
resolution to the lower before connecting projector.
The image data in other than XGA (1024 x 768) is
modified to fit the screen size in initial mode.
Panning function may not operate properly if the
computer system prepared on PC ADJUST Menu
is used.