Filter
Top Products
56
This function is used to reset the lamp replacement
counter. When replacing the projection lamp, reset the
lamp replacement counter by using this function. See
page 62 for operation.
Lamp counter
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, and the lamp
counter to the factory default settings.
Exit the Setting Menu.
Quit
Closed Caption
Closed Caption is a function that displays the audio portion
of a TV program as text on the screen.If the input signal
contains closed captions, you can turn on the feature and
switch the channels. Press the Point buttons to select
CC1, CC2, CC3 or CC4.
If the closed caption is not clear, you can change the text
from Color to White.
Select Factory default and this
box appears. Select [Yes], and
the next box appears.
Factory default
Select [Yes] to
activate it.
Closed Caption
✔ Note:
Do not reset the Lamp replacement counter without
implementation of lamp replacement. Be sure to
reset the Lamp replacement counter only after
replacing the lamp.
✔ Notes:
The Closed Caption is available only under the
situation below
• When the input signal is NTSC of composite and
S-VIDEO, and the system is set according to the
signal or set on "Auto".
• The system must be set on NTSC or Auto in Video
System Selection. (P.39)
• The icon of Closed Caption is displayed in gray
while it is not available.
• The closed caption is unavailable when On-Screen
menu and P-Timer are displayed.
Setting