Filter
Top Products
41
ENGLISH
Setting up the projector
Item Description
Logo ......................... Sets on or off the logo display on
the screen during the startup. (User,
Default, OFF)
Filter control ....... Scroll the filter. Click "Roll-up", a confir
-
mation display appears, and then click
"OK", the filter will be scrolled.
Fan speed control
... Sets the running speed for the cooling
fans. (Normal, Max)
Remote control
.... Selects the remote control code.
(Code1 - Code8)
Power management
... Sets into the selected power manage-
ment mode (OFF, Ready, Shutdown) if
the input signal is interrupted and no
control key is pressed for the specified
period of time.
* The specified time can be set 1 t
o 30
min.
On start .................. Sets the power-on mode when the AC cord is connected to the outlet. (ON, OFF)
Key lock .................. Sets the prohibition of controls either Projector or Remote control. (OFF, Projector,
Remote control)
PJ lock suspend
... When the projector has a security of PIN code lock, disable this function temporarily
by pressing Execute button.
Setting procedure
1. Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again.
2. Access this page with the web browser.
3. Click Execute button on the PJ lock suspend.
Shutter .................... Sets the shutter operation. (ON: close, OFF: open)
Shutter management
... Sets the shutter management operation.
Effect .................... Sets the effect to fade in or out at opening or closing the shutter. (OFF, L1, L2)
Release key ...... Sets available keys to release the shutter. (Any, SHUTTER)
Time ...................... Sets the specified period of time when the projector shuts down after the projector
is left with the shutter closed.
* The specified time can be set 5 to 480 min.
Setting 2