EN-1
To the Owner
Before operating this projector, read this
manual thoroughly and operate the projector
properly.
This projector provides many convenient
features and functions. Operating the
projector properly enables you to manage
those features and maintains it in better
condition for a considerable time.
Improper operation may result in not only
shortening the product-life, but also
malfunctions, fire hazard, or other accidents.
If your projector seems to operate improperly,
read this manual again, check operations
and cable connections and try the solutions
in the "Troubleshooting" section in the end
of this booklet. If the problem still persists,
contact the dealer where you purchased the
projector or the service center.
0
.5' (0.15 m)
SIDE and TOP
REAR
1' (0.3 m) 1' (0.3 m) 3' (0.9 m)
Safety Precaution
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
- This projector produces intense light
from the projection lens. Do not stare
directly into the lens, otherwise, eye
damage could result. Be especially
careful that children do not stare directly
into the beam.
- Install the projector in a proper position.
If not, it may result in a fire hazard.
- Provide appropriate space on the top,
sides and rear of the projector cabinet
for allowing air circulation and cooling
the projector. Minimum clearance must
be maintained. If the projector is to be
built into a compartment or similarly
enclosed, the minimum distances must
be maintained. Do not cover the
ventilation slot on the projector. Heat
build-up can reduce the service life of
your projector, and can also be
dangerous.
- If the projector is not to be used for an
extended time, unplug the projector
from the power outlet.
CAUTION
DO NOT SET THE PROJECTOR IN GREASY,
WET, OR SMOKY CONDITIONS SUCH AS
IN A KITCHEN TO PREVENT A
BREAKDOWN OR A DISASTER. IF THE
PROJECTOR COMES IN CONTACT WITH
OIL OR CHEMICALS, IT MAY BECOME
DETERIORATED.
READ AND KEEP THIS OWNER’S MANUAL
FOR LATER USE.