Filter
Top Products
9 English
Specifications
Features and specifi cations are subject to change without prior notice or obligations.
Troubleshooting
Before requesting service or repair, perform a check as described in the following section. If this does not work,
return the unit to the place of purchase or authorized repair agent to undergo adjustment.
Model
VMC-L2617/L2617P VMC-L2619/L2619P
Display type SXGA a-Si TFT LCD
Color system NTSC/PAL (Automatic detection)
LCD display 17" active matrix
TFT LCD panel
19" active matrix
TFT LCD panel
Viewable size (H x V) 338 x 270 mm/13.3 x 10.6 in. (4:3) 376 x 301 mm/14.8 x 11.9 in. (4:3)
Pixel pitch (H x V) 0.264 x 0.264 mm/0.01 x 0.01 in. 0.294 x 0.294 mm/0.012 x 0.012 in.
Horizontal resolution 1280 x 1024, NTSC: 600 PAL: 620 TV lines (Y/C input mode)
Viewing angle degree Left/Right/Up/Down: 80°
Scanning frequency Horizontal: 30 kHz – 81 kHz, Vertical: 56 Hz – 75 Hz
Contrast ratio 1000:1
Brightness 300 cd/m
2
/ 359 cd/yd
2
Response time Tr/Tf 1.3/3.7 m/sec
Display color 16.7 M
Display monitor timing VESA compatible (VGA mode)
Display mode Video A, Video B, S-Video, VGA
Input connector
Video signal (BNC IN) 2 x Composite sync signal, 1.0 V(p-p), 75 Ω BNC connector
S-Video signal (Y/C IN) Separate Y/C signal, mini-DIN connector
Y signal: 1.0 V(p-p), 75 Ω negative sync
C signal: 0.286 V(p-p), 75 Ω negative sync
Audio signal (AUDIO IN) 2 x –6.0 dBs (400 mVrms), 2W (1W+1W) stereo, RCA pin
VGA signal (VGA IN) VGA Monitor Connector (15-pin)
Red signal, Green signal, Blue signal: 0.7 V(p-p), 75 Ω positive sync
Output connector
Video signal (BNC OUT) 2 x Composite sync signal, 1.0 V(p-p), 75 Ω BNC connector
S-Video signal (Y/C OUT) Separate Y/C signal, mini-DIN connector
Y signal: 1.0 V(p-p), 75 Ω negative sync
C signal: 0.286 V(p-p), 75 Ω negative sync
Menu language English/Chinese/French/German/Spanish/Italian/Portuguese/Dutch/Swedish/Russian/
Korean/Japanese
Power input AC100 – 240 V
Operating condition Temperature: 0°C – +40°C/32°F – 104°F
Humidity: 10% – 90% (non-condensation)
Storage condition Temperature: –20°C – +45°C/–4°F – +113°F
Humidity: 5% – 95%
Power consumption
(Consumption current)
Approx. 42 W (0.7 A)
Weight Approx. 6.0 kg/13.2 lbs. Approx. 6.9 kg/15.2 lbs.
Problem Points to check
No image is displayed. • Is the connected device outputting a video signal?
• Is the connection correct? (Page 5)
• Using the Input Menu and SOURCE button, is the correct source selected? (Page 8)
No sound is heard. • Is the connected device outputting an audio signal?
• Is the connection correct? (Page 5)
• Check the volume level is not set to 0. (Page 4)
The display is dark. • Are the brightness and contrast set to the correct level? (Page 7)
There is a hissing noise. • Effects of this type may be caused by temperature changes in the room but do not indicate
a fault.
The remote controller cannot be
operated.
• Turn the remote controller toward the IR sensor of the monitor.
(Within 30° horizontally to the left and right of the IR sensor) (Page 4)
• Operate the remote controller within 7 m of the IR sensor. (Page 4)
• Remove or avoid any obstacles when using the remote controller.
• The battery is spent and should be replaced.
• Install the battery correctly and make sure the polarity (
+, -) is correct.
• Check that the Remote ID matches the System ID. (Page 6)
L8MAP_MAQ_US_XE_JP(GB_FE_ES_DE_CS_JP).book 9 ページ ２００９年７月７日 火曜日 午後４時５７分