Filter
Top Products
Unit 1: PCL Emulation
Page 1-22 SATO D512 PCL Programming Manual
ESC
*rB End Raster Graphics (Version B)
Signals the end of the raster graphics transfer. If a Raster Height is
specified, the cursor is moved to the first raster row past the Raster
Height.
ESC
*rC End Raster Graphics (Version C)
Same as Version B, but:
• Resets the compression mode to uncoded.
• Sets the left graphics margin to 0.
ESC
*t#H Raster Width (Destination)
Sets the width of the destination raster.
Table 1-15: Raster Graphics (continued)
Command / Parameters Function / Result