SATO DR300 Printer User Manual


 
DR300 Operator Manual
86
Features Graphics Print, Sequential Numbering, Line/Box, Print Position
Adjustment, Back – Feed, Tear – Off, Calendar, Inverse Image,
Zero Slash Selection, Non Standard Code Setting, Hex Dump,
Customized Design Character (16 x 16, 24 x 24 dots)
Self Check/Detection Head Error, Paper End, Ribbon End, Head Open, Memory Card
Error, Test Print
Option Touch Screen Unit, Cutter Unit, Dispenser Unit, PC Card
(JEIDA Type II), Scanner, Cut Ticket/Tag Receiver, Full
Qwerty Keyboard, Rewind Unit.
Label & Carbon Ribbon Specification
Size Min. W 32 mm – Max W 80 mm (inclusive of label web)
Min. P 19 mm – Max W 181 mm (inclusive of label web)
Thickness 0.1 mm – 0.26 mm
Type Rolled Paper
Label
Diameter Max outer diameter : 250 mm
Type Wax, Wax/Resin
Length 300m/roll
Width Max 84 mm
Carbon
Ribbon
Winding Face-in type
Operating Environmental Condition
Input Power Supply Voltage Voltage AC 220V + - 10%
Power Consumption Max 190 VA 130 W
Operating temperature 5~40 d.c.
Operating humidity 30~80 d.c. (No Condensation)
Storage temperature -5~60 d.c.
Storage humidity 30~90 d.c. (No Condensation)
Environmental Condition
Except paper and carbon ribbon
Appendix A