Filter
Top Products
Basics
18
1
Starting the Machine
A Press the operation switch to make the On indicator go on.
The display panel will come on.
Note
❒
If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
❒
During the warm-up period (less than 330 seconds), you can use the Auto
Start function. See
⇒
P.90
“Auto Start”
.
❒
You can set up a copy job and press the
{
Start
}
key while the “Select modes
and press the start key. Scanning originals can be started.” message is dis-
played.
❒
When “Input user code, then press # .” is displayed, enter your user code.
See
⇒
P.90
“User Codes”
.
Shutting Down the Machine
A Press the operation switch to make the On indicator go off.
Turning Off the Main Power
A Turn off the main power switch.
The main power indicator of the control panel goes off.
TSPS010N
Sample Copy
Interrupt
t
op
Start
On
Main Power