Filter
Top Products
Setting Originals
33
2
A Set the aligned originals face up into the document feeder.
Setting a stack of originals is completed when the bottom plate rises.
Important
❒
After the bottom plate of the document feeder rises, do not add or force in
originals.
Note
❒
Straighten curls in the originals before setting them in the document feed-
er.
❒
To avoid a multi-sheet feed, shuffle the originals before setting them in the
document feeder.
❒
You can set the timing for the bottom plate of the document feeder to rise.
See “ARDF Original Table Rise Time” in
⇒
P.329
“Input/Output”
.
Original Orientation
You can set the original orientation separately in the following ways.
This function is useful for copying torn originals or large originals.
❖
Standard Orientation
Select this function when the original direction is the same as the copy paper
direction.
❖
90
°
Turn
This function rotates the copy image by 90
°
.
Use this function when you want to copy onto A3, B4, 11"
×
17" paper.
A Press the
[
Special Original
]
key.
TSPH040E