Filter
Top Products
Operation
18
1
Entering a User Code to Use the Machine
If user codes are turned on, operators
must enter their user code before they
can use the machine. The machine
keeps count of the number of copies
made under each user code.
Note
❒ If you want to use this feature, you
must turn it on and register the
user codes with the user tools. You
can register up to 20 user codes.
See “Set User Code” and “Reg.
User Code” on p.153 “6. Adminis-
trator Mode”.
❒ When user codes are turned on,
the machine will prompt you for
your user code when you turn on
the main switch or after the ma-
chine has been reset.
A
AA
A
Enter your 4–digit user code with
the number keys.
Note
❒ User codes are not displayed on
the panel display.
❒ To change the number entered,
press the {
{{
{Clear/Stop}
}}
} key and
enter the new number.
B
BB
B
Press the {
{{
{q
qq
q}
}}
} key.
C
CC
C
Make your prints.
D
DD
D
To prevent others from making
prints with your user code, hold
down the {
{{
{Clear Modes/Energy Sav-
er}
}}
} key, and then press the
{
{{
{Clear/Stop}
}}
} key.