Filter
Top Products
COPYING WITH MANUAL FEED
When you make a copy with manual feed, you need not replace paper even if
the required size or type of paper is not set in the copier.
S Set a sheet of paper at a time on the manual feed table.
S You cannot use the repeated copying function during manual copying in the
default setting. To change the setting, contact your service representative.
S You can set either paper or an original first. When you have set both of
them, the copier starts copying automatically.
S When you press the Clear/Stop key after setting an original, the original is
delivered without copying.
S When you remove paper from the manual feed table, pull it out gently by
holding its left and right sides.
1
Press the Paper Select key to
turn on the "Manual Feed"
indicator.
2
Pull down the manual feed table.
COPYING 27