Savin C3528 Printer User Manual


 
Basic Procedure
43
2
Select one of the following settings or keys:
[
Normal
]: normal paper
[Thick]: thick paper, post cards, adhesive labels, translucent paper
[OHP]: OHP transparencies
[Duplex]: Use for copying onto the reverse side of paper that has been al-
ready copied onto. P.49 Copying onto the reverse side of paper.
[Duplex Thick]: Use for copying onto the reverse side of thick paper (105-
160g/m
2
, 28-43 lb) that has been copied onto. P.49 Copying onto the re-
verse side of paper.
[Custom]: Use to specify a custom sized. P.45 Copying onto custom size
paper with the bypass tray.
If the copy paper is bent, correct it before setting paper in the bypass tray. If
the bend is not corrected, a paper misfeed might occur.
When you copy onto OHP transparencies, you can select whether a blank slip
sheet is inserted between OHP transparencies.
When you set several sheets at a time, fan them to get air between them before
loading.
If the copy paper is curled, gently roll it to remove the curl.
When you copy onto OHP transparencies, insert them with the copy side up.
Do not stack copy paper above the limit mark.
When setting custom size paper, be sure to set the size after pressing the [Cus-
tom] key.
Copying onto standard size paper with the bypass tray
Note
When you copy onto the reverse side of paper that has been already copied
onto, P.49 Copying onto the reverse side of paper.
Gchyoh1e.eps