
Transfer Request
53
3
C
Enter the “Transfer Request” func-
tion number with the number keys.
Note
❒ If the appropriate display is not
shown, press [↑
↑↑
↑Prev.] or [↓
↓↓
↓Next].
D
Enter a Transfer Stations and
press [Recv. Stn].
Note
❒ Enter the fax numbers of the
Transfer Stations with either
Quick Dials, Speed Dials or the
number keys.
❒ If you make a mistake, press the
{Clear/Stop} key and try again.
❒ To cancel the Transfer Request,
press [Cancel]. The Transmis-
sion Mode menu is shown
again.
E
Enter one or more End Receivers.
Note
❒ You cannot enter the numbers
of the End Receivers directly.
The numbers must be stored in
Quick Dials, Speed Dials or
Groups in the Transfer Sta-
tion(s). To specify an End Re-
ceiver, use the special format
described in. ⇒ P.54 “Specifying
an End Receiver”
❒ Press [Add RcvStn] if you wish
enter more End Receivers.
❒ Press the < or > key to see the
End Receivers already entered.
You can select an End Receiver
from this list and cancel it by
pressing the {Clear/Stop} key.
❒ To cancel the Transfer Request,
press [Cancel].
F
When you have specified all the
End Receivers, press [OK].
G
If you want to enter an additional
Transfer Station, press [Yes] and
repeat steps D
DD
D to F
FF
F.
If you press [No], the Transmission
Mode menu is shown and a check
mark is added to “Transfer Re-
quest”.
Us94-2.tif
L2GB003.tif
L2GB004.tif
Us103-1.tif