Savin C4540 Printer User Manual


 
13
C Set the paper size using the printer driver or the control panel.
The following procedures are not required if you select [Driver / Command]
from [Bypass Tray Setting Priority] in [System] of [Printer Features]. In that case,
set the paper size using the printer driver.
Note
Paper sizes that can be loaded onto the bypass tray are 90 - 305 mm (3.6 -
12 in.) vertical, and 148 - 600 mm (5.9 - 23.7 in.) horizontal.
When loading OHP transparencies or thick paper, set paper size and paper type.
The number of sheets that can be loaded in the bypass tray depends on the
paper type.
Reference
When loading letterhead paper, pay attention to its orientation. See Gener-
al Settings Guide.
For printer driver settings, see the printer driver Help.
Setting the Paper Size Using the Control Panel
Follow the procedure below to set the machine using the control panel when
loading standard size paper onto the bypass tray.
Important
The following procedures are not required if you select [Driver / Command]
from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see “Printer
Features”, General Settings Guide). In that case, set the paper size using the
printer driver.
Under [Printer Features], [System Setting], if you set [Bypass Tray Setting Priority]
to [Driver/Command] , paper size settings made on the printer driver must
match those made on the control panel. If they do not match, an error message
appears and printing stops if [Printer Features], [System,], [Auto Continue] is not
set. For details about [Printer Features] settings, see General Settings Guide.
A Press the {User Tools/Counter} key on the control panel.
B Press [System Settings].
C Press the [Tray Paper Settings] tab.
D Press [Printer Bypass Paper Size].