Filter
Top Products
Rev. 1.01
- 29 -
SRP-275
5. Roll Paper Installation
CAUTION
Do not touch the auto cutter blade when you open rear cover.
1) To prevent data loss, make sure that the printer
is not receiving data.
2) Open the rear cover by pushing the open
button.
3) Remove the used paper roll core if there is one.
4) Insert the paper roll as shown.
5) Be sure to note the correct direction that the
paper should come off the paper roll.
6) Pull out small amount of paper as shown. Then
close the cover and tear off the extra paper by
pulling it toward the front of the printer.