Filter
Top Products
The STB NIB 1010 Basic NIM Module
890USE19600 April 2004 25
Connectors Use either:
a screw type power connector, available in a kit of 10 (model STB XTS 1120)
a spring clamp power connector, available in a kit of 10 (model STB XTS 2120)
The following illustrations show two views of each power connector type. A front and
back view of the STB XTS 1120 screw type connector is shown on the left, and a
front and back view of the STB XTS 2120 spring clamp connector is shown on the
right:
1 STBXTS 1120 screw-type power connector
2 STBXTS 2120 spring clamp power connector
3 wire entry slot
4 screw clamp access
5 spring clamp actuation button
Each entry slot accepts a wire in the range 0.14 to1.5 mm
2
(28 to 16 AWG). Each
connector has a 3.8 mm (0.15 in) pitch between the receptacles.
We recommend that you strip at least 9 mm from the wire’s jacket to make the
connection.