Filter
Top Products
The STB NIB 1010 Basic NIM Module
28
890USE19600 April 2004
STB NIB 1010 Module Specifications
Table of
Technical
Specifications
dimensions width 40.5 mm (1.59 in)
height 130 mm (5.12 in)
depth 70 mm (3.15 in)
interface connectors from INTERBUS network nine-pin SUB-D connector (male)
to INTERBUS network nine-pin SUB-D connector (female)
RS-232 port for
configuration software or
HMI panel
8-receptacle HE-13
to external 24 VDC power
supply
2-receptacle
built-in power supply input voltage 24 VDC nominal
input power range 19.2 ... 30 VDC
input current 400 mA @ 24 VDC
output voltage to island
bus
5 VDC @ 1.2 A
2% variation due to temperature drift, intolerance, or line
regulation
1% load regulation
<
50 mΩ output impedance up to 100 kHz
output current rating 5 VDC @ 1.2 A
isolation no internal isolation (isolation must be provided by a SELV-rated
external 24 VDC source power supply)
noise immunity (EMC) IEC 1131-2
addressable I/O modules supported 12 maximum
segments supported one
hot swapping no
standards INTERBUS conformance INTERBUS Club (www.interbusclub.com)
MTBF 200,000 hours GB (ground benign)