Scientific Atlanta DPC2100 Modem User Manual


 
WebSTAR Model DPC2100 and EPC2100 Cable Modem User’s Guide
8
Back Panel Description
The following illustration describes the back panel components of the DPC2100 and EPC2100 cable modems.
1 12 VDC—Connects the cable modem to the DC output of the
AC power adapter that is provided with your cable modem.
Only use the AC power adapter and power cord that is
provided with your cable modem
2 RST—Reset-to-Default button (Factory Reset)
This button is for maintenance purposes only.
Do not use unless told to do so by your service provider.
3 MAC Address Label—Displays the MAC address of the cable
modem
4 ETHERNET—RJ-45 Ethernet port connects to the Ethernet
port on your PC
5 USB—12 Mbps USB port connects to the USB port on your PC
6 CABLE—F-Connector connects to an active cable signal from
your cable service provider
CAUTION:
Avoid damage to your equipment. Only use the AC
power adapter and power cord that is provided with
your cable modem.