Filter
Top Products
10
WebSTAR Cable Modem Back Panel
Back Panel Components
1 POWER Connects the cable modem to the DC output of the AC power
adapter that is provided with your cable modem
Note: Only use the power cord and the AC power adapter that are
provided with your cable modem.
2 RESET Reset-to-Default button (Factory Reset)
CAUTION:
This button is for maintenance purposes only. Do not use!
3 ETHERNET RJ-45 Ethernet port connects to the Ethernet port on your PC
4 USB 12 Mbps USB port connects to the USB port on your PC
5 CABLE IN F-Connector connects to an active cable signal from your cable
service provider
CAUTION:
Do not connect your PC to both the Ethernet and USB ports at
the same time.
Note: You can connect two separate PCs to the cable modem at
the same time by connecting one to the Ethernet port and one to
the USB port. See Modem Installation next in this guide.
POWER
12 VDC
POWER
12 VDC
RESET
RESET
ETHERNET
ETHERNET
USB
USB
CABLE
IN
CABLE
IN
1
2
3
4
5
T9917