Filter
Top Products
17
USB Driver Installation, continued
Windows 2000
Follow these steps to install the WebSTAR cable
modem USB Drivers for Windows 2000
environments.
1. Insert the USB Cable Modem Driver
Installation Disk into the CD-ROM driver of
your PC.
2. Wait until the Power and Cable indicators on
the cable modem illuminate solid green; then,
plug the USB cable into the USB port on your
PC. The Found New Hardware Wizard
window opens.
3. In the Found New Hardware Wizard window,
click Next.
4. In the Found New Hardware Wizard window,
select Search for a suitable driver for my
device(recommended), then click Next.
5. In the Found New Hardware Wizard window,
select CD-ROM drives, then click Next.
6. In the Found New Hardware Wizard window,
click Next. The system searches for the driver
file for your hardware device.
7. After the system finds the USB driver, the
Digital Signature Not Found window opens
displaying a confirmation message to
continue the installation. Click Yes to continue
the installation. The Found New Hardware
Wizard window reopens with a message that
the installation is complete.
8. Click Finish to close the Found New Hardware
Wizard window.