Filter
Top Products
10 WebSTAR Model DPX213 VoIP DOCSIS Cable Modem User's Guide 4001231 Rev A
WebSTAR Cable Modem Back Panel
Back Panel Components
The follow illustration describes the back panel components of the cable modem.
CABLE USB ETHERNET RESET
12 VDC
LINE 1 LINE 2
1
2
3
4
5
6
7
T10267
1 POWER - Connects the cable modem to the DC
output of the AC power adapter that is provided
with your cable modem
Note: Only use the power cord and the AC
power adapter that are provided with your cable
modem.
2 LINE 2 – RJ-11 telephone port connects to home
telephone wiring to conventional telephones or
fax machines
3 LINE 1 – RJ-11 telephone port connects to home
telephone wiring to conventional telephones or
fax machines
4 RESET – Reset-to-Default button (Factory Reset)
CAUTION: This button is for
maintenance purposes only. Do not use
unless instructed to do so by your cable or
telephone service provider!
5 ETHERNET - RJ-45 Ethernet port connects to the
Ethernet port on your PC
6 USB - 12 Mbps USB port connects to the USB
port on your PC
7 CABLE IN - F-Connector connects to an active
cable signal from your cable service provider
CAUTION: Do not connect your PC to
both the Ethernet and USB ports at the same
time.
Note: You can connect two separate PCs to the
cable modem at the same time by connecting one
to the Ethernet port and one to the USB port. See
Install the Cable Modem, next in this guide.