Seagate 7200.3 Computer Drive User Manual


 
Momentus 7200.3 SATA Product Manual, Rev. C 7
2.6 Physical characteristics
2.7 Seek time
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using
drive diagnostics. The specifications in the table below are defined as follows:
Track-to-track seek time is an average of all possible single-track seeks in both directions.
Average seek time is a true statistical random average of at least 5,000 measurements of seeks between
random tracks, less overhead.
Note. These drives are designed to consistently meet the seek times represented in this manual. Physical
seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted
values. However, due to the manner in which these drives are formatted, benchmark tests that
include command overhead or measure logical seeks may produce results that vary from these
specifications.
Drive specification
Height (mm)
(inches)
9.5 +/-0.2
0.374 +/-0.0078
Width (mm)
(inches)
69.85 +/-0.249
2.75 +/-0.0098
Length (mm)
(inches)
100.3 +/-0.25
3.95 +/-.010
Typical weight
ST9320421AS
ST9320421ASG
ST9250421AS
ST9250421ASG
ST9200421AS
ST9200423ASG
ST9160411AS
ST9160411ASG
ST9120411AS
ST9120411ASG
ST980411AS
ST980411ASG
110 grams
0.238 pounds
105 grams
0.227 pounds
Table 2: Typical seek times
Typical seek times (msec) Read
Track-to-track 1.0
Average 11.0
Full-stroke 22.0
Average latency 4.17