Filter
Top Products
PULSAR.2 SAS PRODUCT MANUAL, REV. C 2
1.0 SCOPE
This manual describes Seagate Technology
®
LLC, Pulsar
®
.2 SAS (Serial Attached SCSI) drives.
Pulsar.2 drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number
100293071) describes the general SAS characteristics of this and other Seagate SAS drives. The Self-Encrypting Drive Reference
Manual, part number 100515636, describes the interface, general operation, and security features available on Self-Encrypting Drive
models.
Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual may
not be predictive of future generation specifications or requirements. If you are designing a system which will use one of the models listed
or future generation products and need further assistance, please contact your Field Applications Engineer (FAE) or our global support
services group as shown in See “Seagate Technology Support Services” on page 1.
Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.
Note. Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models before a differ-
entiation between drive-based encryption and other forms of encryption was necessary.
Note. The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for “Security of Data at Rest”
based on the standards defined by the Trusted Computing Group (see www.trustedcomputinggroup.org).
For more information on FIPS 140-2 Level 2 certification Section 7.0 on page 34.
For product certification status visit -
http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/1401vend.htm.
Standard models Standard SED models FIPS 140-2 LEVEL 2
ST800FM0002 ST800FM0012 ST800FM0022
ST800FM0032 ST800FM0042
ST400FM0002
ST400FM0042
ST200FM0002
ST200FM0042
ST100FM0002
ST100FM0052