Filter
Top Products
SEAGATE 600 PRO SSD PRODUCT MANUAL, REV. A 29
Bit Word 69
5 Read zero after Trim is supported
6 Optional ATA 28-bit commands supported
8 Download Microcode DMA supported
9 Set Max Password DMA and Set Max Unlock DMA supported
10 Write Buffer DMA Supported
11 Read Buffer DMA Supported
12 DEVICE CONFIGURATION IDENTIFY DMA and
DEVICE CONFIGURATION SET DMA are supported
13 Long Physical Sector Alignment Error Reporting Control is supported
14 Deterministic read after Trim is supported
Bit Word 76
0 Shall be cleared to zero
1 Supports SATA Gen1 Signaling Speed (1.5Gb/s)
2 Supports SATA Gen2 Signaling Speed (3.0Gb/s)
3 Supports SATA Gen3 Signaling Speed (6.0Gb/s)
4-7 Reserved for Serial ATA
8 Supports the NCQ feature set
9 Supports receipt of host initiated power management requests
10 Supports Phy Event Counters
11 Supports Unload while NCQ commands are outstanding
12 Supports NCQ priority information
13-15 Reserved for Serial ATA
Bit Word 78
0 Shall be cleared to zero
1 Device supports non-zero buffer offsets
2 Device supports DMA Setup auto-activation
3 Device supports initiating power management
4 Device supports in-order data delivery
5 Reserved for Serial ATA
6 Device supports Software Settings Preservation
7-15 Reserved for Serial ATA
Bit Word 82
0 The SMART feature set is supported
1 The Security feature set is supported
2 Obsolete
3 Mandatory Power Management feature set is supported
4 PACKET feature set is supported
5 Volatile write cache is supported
6 Read look-ahead is supported
7 Release interrupt is supported
8 SERVICE interrupt is supported
9 DEVICE RESET command is supported
10 HPA feature set is supported
11 Obsolete
12 WRITE BUFFER command is supported
13 READ BUFFER command is supported
14 NOP command is supported
15 Obsolete