![](http://pdfasset.owneriq.net/a/65/a6581f7d-d3d2-49d6-ba78-be7d4b867158/a6581f7d-d3d2-49d6-ba78-be7d4b867158-bg25.png)
Barracuda Serial ATA V Product Manual, Rev. B 27
Notes:
1. All pins are in a single row, with a 1.27 mm (0.050”) pitch.
2. The comments on the mating sequence apply to the case of backplane
blindmate connector only. In this case, the mating sequences are:
• the ground pins P4 and P12.
• the pre-charge power pints and the other ground pins.
• the signal pins and the rest of the power pins.
3. There are three power pins for each voltage. One pin from each voltage
is used for pre-charge when installed in a blind-mate backplane configu-
ration.
4. All used voltage pins (V
x
) must be terminated.