Filter
Top Products
Elite 9 Installation Guide, Rev. B 37
Systemgehäuse nicht an die HDA/PCB-Erdung
anschließen wollen, müssen Sie das Laufwerk auf
nichtleitende Weise (galvanisch isoliert) im Host-
System einbauen. Die daraus u.U. resultierende
verstärkte elektromagnetische Strahlung fällt in
den Zuständigkeitsbereich des Systemdesigners.
5. Replace the host system’s cover.
5. Setzen Sie das Gehäuseoberteil des Host-Systems
wieder auf.
Formatting the drive
Warning. Formatting a drive erases all user data. Be
sure that you understand this principle before
formatting any hard disc drive.
It is not necessary to format a drive which has
previously been used to store data, unless
your intention is to erase all user data.
1. Turn on DC power.
2. Boot the system from a system floppy disc or from a
previously installed hard disc drive if there is one.
3. Format the disc drive. The Elite 9 disc drive is de-
signed to operate with a variety of operating systems.
Refer to your system or SCSI controller manuals for
information about formatting and setting up the drive.