Filter
Top Products
Security
TPG60 User Manual 56
Defining the Password via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Configuration – Protection.
3. Enter a password into the Password box.
4. Tick Access control, if necessary.
5. Click Save to confirm.
ª The settings are saved.
Defining the Password via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG60 in the print server list.
The Properties dialog appears.
3. Select Configuration – Protection from the navigation bar.
4. Enter a password into the Password box.
5. Tick Access control, if necessary.
6. Click OK to confirm.
ª The settings are saved.
7.2 How to Protect the TPG60 against Unauthorized
Access? (IP Sender)
You can restrict the access to the TPG60 to a certain number of
clients.
For this purpose, you must enter the IP addresses or host names of
the clients into the IP sender box. The TPG60 will only accept data
packets from the specified clients. Up to eight IP senders can be
specified. The use of wildcards (*) is possible to define subnetworks,
for example.