Filter
Top Products
Firmware Update
TPG60 User Manual 74
9.2 How to Configure Dynamic Firmware Updates?
Specify a directory on the file server. The directory contains the
current firmware files.
At each restart, the TPG60 verifies the version of the firmware files.
If the TPG60 detects a higher version, this version will be installed
automatically on the TPG60.
The dynamic firmware update cannot be used to save an earlier
version of the firmware on the TPG60. In this case use the standard
firmware update.
Requirements
; The TPG60 is turned on and visible in the network.
; The file server on which the firmware files are stored either uses
the ’anonymous login’ or the TPG60 is set up as user on the file
server.
What do you want
to do?
’Dynamic Firmware Update via the TPG Homepage’ Ö74
’Dynamic Firmware Update via the InterCon-NetTool’ Ö76
’Dynamic Firmware Update via FTP’ Ö76
Dynamic Firmware Update via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select Actions – Download Area.
3. Select Dynamic Firmware Update.
4. Tick Dynamic Firmware Update.
5. Specify the IP address of the file server on which the new
firmware files are to be stored.
Syntax: ftp://<file server IP address>/
<Firmware file name>
Example: ftp://192.168.0.100/hp93.bin
(If your system supports name resolution via WINS, DHCP, or