TM-T90 User’s Manual 3
English
PAPER OUT LED
Lights when roll paper is nearly out.
FEED Button
Feeds the roll paper.
Power Switch and Power Switch Cover
The power switch is on the front of the printer. Press it to turn on the
printer, and press and hold it for more than 3 seconds to turn off the
printer.
Power Switch Cover
You can use the enclosed power switch cover to make sure that the power
switch is not accidentally pressed. Peel off the backing tape and press the
cover into place to install it in the position shown in the illustration below.
WARNING:
If an accident occurs when the power switch cover is attached,
immediately remove the bottom cover and unplug the power supply
cable to avoid fire.
Unpacking
The following items are included for the standard specification printer. If
any items are damaged, contact your dealer.
❏ Printer
❏ Paper roll
❏ Power switch cover
❏ Control panel label used for vertical installation
❏ Rubber feet (4) for vertical installation