Filter
Top Products
11
Ver x.x - This tells you the software version installed in the color changer set to the
channel you are looking at.
[
/Enter
]
Identify - Pressing [
-
] will cause the color changer, whose status you are viewing, to
initialize.
For the Goboram II:
GoboRAM - Indicates there is a gobo changer addressed to this channel.
[
/Enter
]
DCV 24.0 - This displays the DC voltage at the gobo changer.
[
/Enter
]
Pos 000 - This displays the position of the gobo section channel. If the gobo changer is
moving the carriers toward FL, an arrow pointing to the right (>) will be displayed. If the
gobo changer is moving the carriers toward 00, an arrow pointing to the left (<) will be
displayed.
[
/Enter
]
Rot 000 - This displays the rotational position of the gobo. If the gobo changer is
rotating the carriers toward FL, an arrow pointing to the right (>) will be displayed. If the
gobo changer is rotating the carriers toward 00, an arrow pointing to the left (<) will be
displayed.
[
/Enter
]
Spin OFF - When the third control channel for this gobo changer has a level of 99 or
less, this display will tell you the continuous rotation option is off. When the third control
channel has a level of FL, the display will tell you the gobo is spinning counter clock
wise if the second control channel has a level of 00 - 49%. The display will tell you the
gobo is spinning clock wise if the second control channel has a level of 51% - FL. When
the third control channel has a level of FL and the second control channel has a level of
50%, the display will tell you the gobo is not spinning by showing HLD.
[
/Enter
]
Ver x.x - This tells you the software version installed in the gobo changer set to the
channel you are looking at.
[
/Enter
]