19
Follow these steps to install the hanger bracket.
1. Disconnect AC power from the power supply.
2. Place the power supply on its side on a flat surface.
3. Position the brackets as shown below.
4. Attach the bracket using a 3/16" Allen wrench and the supplied screws.
Note: Use the supplied thumb screws to clamp the hanger brackets to the desired pipe
or truss.
Figure 6
90 - 250 VAC 50 / 60 HZ
4 AMP SLO -BLO AT 115 VAC
2 AMP SLO -BLO AT 230 VAC
1
2
W
A
Y
P
O
W
E
R
S
U
P
P
L
Y
1
9
0
1
2
Figure 10