Sennheiser EK 500 Computer Hardware User Manual


 
11
time are corrected correspondingly. Due to the
missing sensor, individual rechargeable battery cells
will not be identified as accupacks.
y The monitoring of the accupack temperature during
charging in the L 2015 charger.
Plugging the plug-on transmitter onto a
microphone
̈ Plug the transmitter’s XLR-3F socket onto the
microphone’s XLR-3M socket.
̈ Tighten the locking ring as shown.
Note:
The transmitter uses the microphone body as an
antenna – therefore only microphones with a metal
casing should be used for best signal transmission.
³
·