Filter
Top Products
22
̈ Press the SET button to change to the next segment and
select the next character.
̈ Have you entered the name completely? Press the SET
button to store your setting and to return to the top
menu level.
Loading the factory-preset default
settings –
RESET
Via the “RESET” menu, you can load the factory-preset
default settings. Only the selected setting for the pilot tone
remains unchanged. After the reset, the transmitter is
restarted and the standard display is shown on the display
panel.
Activating/deactivating the pilot tone
transmission
– PILOT
Via the “PILOT” menu, you can activate or deactivate the
pilot tone transmisssion.
The pilot tone supports the receiver’s squelch function
(Squelch) and protects against interference due to RF
signals from other units. The transmitter adds an inaudible
signal, known as the pilot tone, to the transmitted signal.
The receiver detects and evaluates the pilot tone, and is
thus able to identify the signal of the matching transmitter
and mute all others.
Transmitters of the ew 500 series (first generation) do not
transmit a pilot tone and the receivers of the ew 500 series
(first generation) cannot evaluate the pilot tone.
Nevertheless, you can combine the plug-on transmitter
with a receiver of the first generation. However, when
combining units, please observe the following:
y With the ew 500 G2 plug-on transmitter and an ew 500 G2
receiver:
Activate the pilot tone function with both transmitter and
receiver.
y With the ew 500 G2 plug-on transmitter and an ew 500
receiver or vice versa:
Deactivate the pilot tone function with the ew 500 G2
transmitter or receiver.