Sennheiser EK 500 Computer Hardware User Manual


 
12
Using the plug-on transmitter
Switching the plug-on transmitter on/off
The transmitter can only be switched off when the standard
display is shown on the display panel. When in the
operating menu, briefly pressing the ON/OFF button will
cancel your entry (ESC function) and return you to the
standard display with the last stored settings.
Note:
Remove the batteries or the accupack when the
transmitter will not be used for extended periods of
time.
̈ Press the ON/OFF button º to switch the transmitter
on. The red LED lights up.
̈ To switch the transmitter off, press the ON/OFF button
º until “OFF” appears on the display. The red LED
goes off.
Muting the plug-on transmitter
The transmitter has a MUTE switch that noiselessly mutes
the audio signal without switching the transmitter off.
̈ Set the MUTE switch µ to the position ’MUTE’. The
“MUTE” display appears on the display panel. Provided
that the pilot tone function is activated on both the
transmitter and the receiver, the “MUTE” display also
appears on the receiver display panel.
º
µ