SharkRack 42U Computer Hardware User Manual


 
SharkRack Enclosure Installation Guide
ID-00210-000 REV D, ECO2773 Page 29 of 46
Installing a Typical 19 inch EIA Power Strip
Step Detail
1. Secure to the Cabinet Mounting Rails
1a. (As required) Install 10-32 cage nuts. Some mounting
rails require the use of cage nuts; install them into the
appropriate holes as shown.
Or
Install 10-32 clip nuts as shown. Some mounting rails
require the use of clip nuts; install them into the
appropriate holes as shown.
Figure 30
1b. (As required) Adjust the mounting brackets orientation.
Remove the hardware from the brackets as required.
Rotate the mounting brackets as required. Reinstall the
hardware.
Figure 31
1c. Secure the strip using (6) 10-32 x 1/2 inch panhead
screws.
1d. Connect necessary cables.
Figure 32
Or