Filter
Top Products
MAKING COPIES
26
Originals that cannot be used in the RSPF
The following originals cannot be used. These may cause misfeeds or smudging and
unclear images.
• Transparencies, tracing paper, other transparent or translucent paper, and
photographs.
• Carbon paper, thermal paper.
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal transfer printing), originals on
thermal transfer paper.
Stream feeding mode
"SET ORIGINALS FOR STREAM FEEDING" will appear in the display for five
seconds after all originals are fed. If a new original is placed in the RSPF during this
time, the original will be automatically fed in and copying will begin with the same
setting. The stream feeding mode is disabled in "STREAM FEEDING" in the user
programs (p.65).
Capacity of paper output tray
When copying onto paper larger than A4 size, pull out the paper
output tray extension.
• The paper output tray can hold a maximum of 250 pages. If more
than 250 pages are allowed to accumulate, a paper jam may occur.
• After removing paper, if you need to return the paper to the paper
output tray, lift up the paper holder arm and place the paper under the
arm.
Note
Maximum number of pages that can
be held in the tray: 250
Note