Filter
Top Products
51
4
Chapter 4
HOW TO USE THE FAX FUNCTION
The stand alone fax component of your machine offers a range of sophisticated features that allow you to control
image quality, reception mode, broadcasting, polling, and transmission priorities. Functions such as sending
original(s) from memory and substituting reception into memory are possible, due to the large memory capacity.
SENDING ORIGINALS
SETTING THE ORIGINAL
This section describes setting original(s) in the RSPF or on the document glass.
When Using the RSPF:
1
Confirm that there are no original(s)
on the document glass and that
copying is not in progress, then
gently close the RSPF.
2
Adjust the original guides to the width
of your original(s).
3
Place the original(s) face up and push
it gently into the document feeder
tray. The top edge of the original(s)
should enter the fax first.
4
There are two ways to send the fax:
• To scan the original into memory, then dial and
transmit, continue with the "DIALING AND
TRANSMITTING" section.
• To dial and transmit the original directly without
first scanning it into memory, press the
[MEMORY] key. Continue with the "DIALING
AND TRANSMITTING" section.
Original face up