Filter
Top Products
66
5
Chapter 5
SPECIAL FUNCTIONS
MEMORY
Your machine has a memory area that can be used to store both incoming faxes and outgoing originals.
● Approximately 120 pages of average content can be held in memory for transmission. Less can be held if any of
the pages were scanned using fine or superfine resolution.
Substitute Reception into Memory
This is a back-up function that is automatically activated if your fax runs out of paper, the TD cartridge needs
replacement (See the Operation Manual.), or the paper jams.
The message "FAX RCVD IN MEMORY" will only appear in the display at the time the original is initially received
into memory. After reception is complete, one of the following messages, "NO XXX SIZE TRAY CHANGE TRAY
SETTING" "LOAD XX PAPER INTO TRAY XX" or "CLEAR PAPER JAM." will appear in the display. When you add
paper (and set the paper size), replace the TD cartridge, or clear the jam, the stored originals will automatically be
printed out.
• If you received originals in memory because the fax ran out of paper, be sure to add paper which is the same size
as the paper previously used. If not, the original print-out size may not match the size of the printing paper.
Take care that the remaining memory does not become 7% or you cannot receive any more faxes.
Note